Extensions tape-in cheveux humains Remy pour programmes B2B. Confirmez le type de tape, l’épaisseur de bande, la longueur, le poids par pièce, la couleur et l’emballage comme spécification répétable.
Les conditions commerciales et les détails techniques non confirmés sont communiqués uniquement après examen de la spécification.
Quality GuaranteeSample approval before production
Reorder SupportReturn to approved specification
Colour MatchingPhysical references available
Flexible Lead TimesExpress or scheduled
GAMME CLIP-IN PAR NIVEAU DE MARCHÉ
Trois niveaux de demande. Trois profils de volume et de marge différents.
Construisez un programme clip-in autour de ce qui se vend vraiment : classiques plein jeu éprouvés, constructions seamless en forte croissance et pièces halo-wire à faible concurrence. Chaque niveau utilise la même base 100 % cheveux humains Remy ; la différence tient à la construction, au profil de la porteuse et à la spécification.
CLASSIC BESTSELLERS
Classic Sandwich Tape-In Wefts
The salon standard and highest-volume format. Two adhesive panels sandwich a fine section of natural hair for a flat, secure hold. This is the first tape-in product most stylists learn and the safest volume driver for wholesale programmes.
Comprend
Classic PU tape wefts · 4 cm standard width · 20/40/60 pcs pack
Spécification typique
14–24 in · 2.5–3.5 g per piece · 4 cm panel width · medical-grade acrylic adhesive
Guide de poids
Fine hair 40–50 pcs; medium hair 50–60 pcs; thick hair 60–80 pcs for full coverage
Pourquoi le stocker
Largest salon audience, predictable reorder cycle, easiest to train stylists on
The fastest-growing segment as clients demand a flatter root profile and longer wear cycles. Ultra-thin PU or matte-finish bases reduce visible seams, while re-tapeable panels let salons refresh the adhesive and reuse the hair.
A smaller but high-margin segment covering fashion balayage, root-to-tip ombre, low-adhesive sensitive-scalp panels and starter kits for new wearers. These products differentiate a range beyond classic solid colours.
Choose the product in the same order your customer does.
Start with the natural-hair profile and desired coverage, then choose adhesive profile, piece count and grams. This prevents a buyer from treating every tape-in pack as the same product.
01 · NATURAL HAIR
Match the wearer profile
Fine hair usually needs lighter, fewer pieces and gentler adhesive; medium and thick hair need more pieces and stronger hold for a lasting blend.
02 · DESIRED COVERAGE
Choose pack size by coverage
Decide whether the customer needs a half-head refresh, standard full-head coverage or extra density before locking piece count.
03 · FINISHED PRODUCT
Lock construction and specification
Approve the tape type, piece count, grams per piece, length, colour, adhesive system and packaging together as one repeatable product.
PLANS DE JEU VÉRIFIÉS
Sachez exactement ce qui se trouve dans chaque jeu complet.
Ces cartes de pièces proviennent de la fiche produit DS HAIR existante. Les grammes, la construction, la longueur et la couleur finaux sont confirmés avec l’échantillon sélectionné.
20 pcs / pack
A half-head or maintenance pack, typically 10 sandwiches for targeted volume or side coverage.
Quantité
Largeur de la tresse
Disposition des clips
20 pieces
4 cm width
2.5–3.5 g per piece
Forms 10 sandwiches
Fine–medium hair
Targeted volume or refresh
40 pcs / pack
A full-head starter pack, typically 20 sandwiches for a standard full coverage installation.
Quantité
Largeur de la tresse
Disposition des clips
40 pieces
4 cm width
2.5–3.5 g per piece
Forms 20 sandwiches
Medium hair
Standard full-head coverage
60 pcs / pack
An extra-full pack, typically 30 sandwiches for thick hair or clients wanting maximum density.
Quantité
Largeur de la tresse
Disposition des clips
60 pieces
4 cm width
2.5–3.5 g per piece
Forms 30 sandwiches
Thick hair
Maximum density coverage
LA DÉFINITION COMPLÈTE DU PRODUIT
Six couches forment une spécification reproductible.
Un nom de catalogue ne suffit pas. Ces six couches doivent concorder avant l’approbation de l’échantillon et le devis.
01
Wearer & result
Fine, medium or thick natural hair; volume, length, side fill or full coverage.
02
Tape construction
Classic PU, invisible ultra-thin, re-tapeable or sensitive-scalp tape; base colour and thickness.
03
Pack architecture
Piece count, panel width, grams per piece and total pack weight.
04
Adhesive system
Medical-grade acrylic, re-tapeable tabs or low-adhesive sensitive formula; hold duration and replacement schedule.
05
Hair specification
Length, texture, Remy direction, colour reference, drawing level and finish.
06
Commercial presentation
Quantity, label, backing card or storage format, artwork, barcode and market requirements.
CRÉER VOTRE FICHE D’ACHAT
Sélectionnez la spécification que vous souhaitez nous faire examiner.
Ces contrôles préparent une demande ; ils n’indiquent pas de stock en direct. Faisabilité, MOQ, prix et délai sont confirmés par écrit.
SYSTÈME DE COULEUR PRINCIPAL
DS HAIR Colour Chart 2
Screen colour is for initial selection only. Final shade approval should use a physical colour ring or confirmed sample. Where the source chart has no published shade code, Ref numbers are temporary website identifiers only.
Extensions tape-in cheveux humains Remy pour programmes B2B. Confirmez le type de tape, l’épaisseur de bande, la longueur, le poids par pièce, la couleur et l’emballage comme spécification répétable.
POINTS D’ÉVALUATION
Ce que votre équipe doit vérifier.
Utilisez un échantillon représentatif pour transformer les impressions visuelles en une référence produit approuvée et reproductible.
01
Base & adhesive
Review PU thickness, base colour/translucency, adhesive tack, residue and wash-cycle performance.
02
Hair retention
Test shedding before and after controlled washing, styling and tape replacement cycles.
03
Panel consistency
Confirm every panel width, hair weight and end density across the pack.
04
Comfort & removal
Check scalp tension during wear and clean removal with the recommended solvent.
CONNAISSANCE DE LA CONSTRUCTION
Classic sandwich and invisible tape are two different product constructions.
Invisible and classic are construction choices, not automatic quality grades. The correct decision depends on the target wearer, adhesive performance and approved physical sample.
Point de décision
Classic PU Sandwich Tape
Invisible Ultra-Thin Tape
Top construction
Standard PU base with exposed adhesive
Thinner, often translucent or colour-matched base
Profile at the root
Slightly thicker seam; strong hold
Designed to sit flatter with less visible edge
Key development risk
Adhesive strength, residue control and hair retention
Base translucency, edge lift and wash-cycle durability
Colour consideration
Base colour must blend with hair shade
Base should be translucent or closely matched to scalp
What a buyer must approve
Physical panel sample plus adhesive hold test
Physical panel sample plus root-seam visibility test
TAPE-IN FORMATS
Four adhesive profiles—four different buying briefs.
Select the tape profile by wearer density, target result and maintenance model. Do not use piece count as a shortcut for hold, comfort or quality.
Faites défiler horizontalement pour comparer les méthodes →
Question de l’acheteur
Classic Sandwich
Invisible Ultra-Thin
Colour / Ombre
Custom Panel
Format de produit
Standard 4 cm PU panels
Thinner, often translucent base
Pre-blended colour transitions
Buyer-defined width/grams
Key buying question
Does panel count and adhesive suit the wearer?
How flat and invisible is the root seam?
Are root and end colours matched to the client?
What exact panel spec must production repeat?
Weight decision
Confirm grams per piece and pack count
Confirm grams per piece and re-tape cycle
Confirm grams per piece and colour placement
Confirm total and per-panel weight
Sample focus
Panel hold, residue and hair retention
Root visibility and wash durability
Colour accuracy and blend
Repeatability against written spec
Construction, panel width, adhesive system, total pieces, grams per piece and colour must be confirmed on the selected sample.
LA DIFFÉRENCE DS HAIR
Un processus d’approvisionnement structuré, pas une affirmation de qualité sans fondement.
Nous comparons la façon dont un projet est géré — et ne faisons pas d’affirmations non vérifiées sur le cheveu d’un autre fournisseur.
Point de décisionProcessus structuré DS HAIRRisque d’approvisionnement non structuré
Starting pointWritten product name and buying briefA photo or broad catalogue name
Set definitionPiece map, widths, clip count and weight recordedOnly total piece count discussed
Colour decisionPhysical colour reference recommendedScreen colour treated as final
Sample recordApproval points and changes documentedNo shared repeat-order benchmark
Repeat orderReturn to the approved specificationRebuild the requirement from chat history
STATUT DE LA SPÉCIFICATION
Faits confirmés, clairement séparés des points ouverts.
DS HAIR ne publie pas d’hypothèses comme spécifications produit. Les points ouverts sont confirmés avec le lot d’approvisionnement sélectionné et le devis.
Utilisez la page pour prendre une meilleure décision d’achat.
Conseils pratiques pour les salons, distributeurs et équipes private label. Les affirmations spécifiques au produit nécessitent l’approbation de l’échantillon.
01
What types of human hair tape-ins are available?
The range can be developed as classic sandwich panels, invisible ultra-thin panels, re-tapeable panels, sensitive-scalp panels or fashion colour/ombre panels. Each type serves a different wearer profile and salon workflow.
02
How many tape-in pieces does a client need?
Fine hair may need 40–50 pieces for a full look, medium hair 50–60 pieces and thick hair 60–80 pieces. Two pieces form one sandwich, so a 40-piece pack creates 20 sandwiches.
03
How do classic and invisible tape-ins differ?
Classic tape-ins use a standard PU base with medical-grade adhesive. Invisible tape-ins use a thinner, often translucent base to reduce the visible seam at the root. Hold, residue and re-tapeability must be tested for each.
04
What controls a reliable reorder?
Keep one approved sample and one written specification covering panel width, grams per piece, adhesive type, base colour, hair details, colour reference, tolerances, packaging and QC checkpoints.
05
Can tape-in hair be reused?
Yes, if the panels are designed as re-tapeable. Stylists remove the panels, clean residue and apply new adhesive tabs. Re-tapeable panels can extend the useful life of the hair and create recurring sales of replacement tape.
06
What should a buyer check before approving colour?
Match the base/root colour to the client’s natural hair and confirm any balayage or ombre transition against a physical reference. Screen colours are not reliable for final approval.
AXES DE DÉVELOPPEMENT LIÉS
Construisez une gamme d’extensions cohérente.
Ce sont des voies de demande, pas des listes de stock en direct. Chaque produit nécessite sa propre spécification et référence d’échantillon.
No. This product family is identified by its product name and confirmed specification: classic, invisible, re-tapeable or colour/ombre tape-in, followed by the panel format, length, grams, colour and packaging.
Can I request a sample pack?
Yes. Share the preferred tape type, piece count, length, target grams per piece, colour direction and any adhesive requirements. Sample feasibility, cost and timing are confirmed against that brief.
Does 40 pcs/pack define the full product?
No. The full specification also needs the construction, panel width, grams per piece, adhesive system, length, texture, colour reference and repeat-order tolerances.
Can DS HAIR develop invisible or re-tapeable tape-ins?
Yes. State the target base thickness, transparency level, adhesive strength and whether replacement tape tabs are required so the construction can be evaluated.
Are all lengths and weights shown ready to order?
No. They are buying-request options for preparing a brief. A length and gram value is not confirmed until it is tied to the chosen product type, panel spec, hair specification and written quotation.
Can I request private-label packaging?
Yes. Label, backing card, storage box and retail-pack requirements can be reviewed with the product brief. Feasibility and minimum quantities are confirmed separately.
